WELDED BLADE STABILIZERS
The Welded Blade Stabilizers are manufactured to be long-wearing, low-cost tools, designed to give optimum wear performance in most formation. They are available with 360 ° coverage spiral blades or a straight-blade configuration.
Features
The body is manufactured from AISI 4145H Series alloy or nonmagnetic steel. The blades are manufactured from mild steel(Which is easily washed over if necessary), and welded to the body following exacting pre-heating, welding and post heating specifications. A choice of four different hardfacings is available (see hardfacing illustration).All connections are machined to API specifications. Maintenance and replacement procedures for blades will be provided with spare sets of blades.
Dimensional Data for Welded Blade Stabilizers
(Complete assembly. All dimensions in inches)
 |
Dimensional Data for Welded Blade Stabilizers
(Complete assembly. All dimensions in inches) |
 |
| |
Hole Size
Range
A |
Body
O.D.
B |
Bore
Diameter
C |
Fishing
Neck
Length
D |
Blade
Length
E |
Overall
Length
F |
Approx
Weight
(lbs.) |
Replacement
Blades
(3 per set)
Shipping
Weight
(lbs.) |
5 ½ -
6 ½ |
4 1/3 -
4 ¾ |
2 |
24 |
11 |
60 |
280 |
25 |
6 ½ -
6 ½ |
4 ¾
- 5 |
2 |
24 |
11 |
60 |
230 |
30 |
7 ½ -
7 ½ |
5 ¾ -
6 ½ |
2 ¼ |
24 |
13 |
61 |
375 |
45 |
8 ½ -
8 ½ |
6 ¼ -
6 ½ |
2
13/14 |
24 |
13 |
61 |
490 |
60 |
9 ½ -
9 ½ |
6 ¾ -
7 ¾ |
2 13/14 |
24 |
15 |
61 |
680 |
85 |
10 ½ -
11 |
7 ¾ -
8 |
2 13/14 |
24 |
15 |
64 |
750 |
100 |
12 -
12 ¼ |
7 ¾ -
8 ¼ |
2 13/14 |
28 |
18 |
64 |
980 |
120 |
14 ¾ -
15 |
7 ¾ -
8 ¼ |
2 13/14 |
28 |
23 |
66 |
1170 |
170 |
17 -
17 ½ |
7 ¾ -
9 ¾ |
2 13/14 |
28 |
23 |
66 |
1360 |
225 |
| 22 |
9 3/2
- 11 |
2 13/14 |
28 |
28 |
69 |
1775 |
300 |
| 24 |
9 3/2
- 11 |
2 13/14 |
28 |
28 |
69 |
1775 |
325 |
| 26 |
9 3/2
- 11 |
2 13/14 |
28 |
28 |
69 |
1775 |
340 |
ORDERING INFORMATION:
To place an order or request a quotation, please specify the following:
| Fully completed tool |
Spare set of blades (3 blades/set) |
- Hole size
- Body or drill collar O.D.
- Body I.D
- Type hard facing designed
- Top and bottom tool joint Connections .
- Special requirements such as stress relief groove on pin and bore back on box.
|
-
Hole size
- Body or drill collar O.D
- Type hard facing
- Quantity of sets
|
|
|
|
 |
 |
 |
|
3-Blade Spiral
Stabilizers
3 or 4
Straight-Blade Stabilizers
|
